Many ways can be done in gold processing. Starting from a very traditional way by using tools such as pan or skillet that will be filled soil or rock containing gold metal and rocked so will the gold be left in the bottom tray. This process depends on the density of the metal. This method is usually to process alluvial gold.
There's also using a sluice box. This tool also utilizes the density of gold coins sought. This tool suck sand and rocks on the river bottom and then running it on a path that has been equipped with the fiber or the carpet. So later sought gold minerals will precipitate on the fibers or fiber.
There is a wide range of equipment and materials that can be used to make gold panning, ranging from simple or traditional to the modern. What is clear there are some basic categories of gold panning equipment are as follows:
* Gold Panning Supplies- The process of separating the gold from ore dirt (soil, mud, rocks, etc.) using a pan / wok. The most simple and the results are few.
* Sluice Boxes - Sluice boxes, is a further development of gold panning. more simple and more results than using a pan gold panning. A sluice box connect / spraying water from the water source to the gravel / dirt / sand containing gold ore.
* Gold Metal Detector - Gold detector raises the possibility of the discovery of gold deposits under the surface, unlike gold panning sluice box or that can only be used for the soil surface. This tool is a modification of the usual metal detector, which can detect small amounts of gold (gold ore grains) even in the depths of the soil deeper than the usual metal detector, thus minimizing the possibility of failure panning. There is even an underwater gold detector.
* Gold dredges - more free-steam shovel, which makes miners were able to reach areas and depths are deeper and wider with heavy and complicated equipment. Among vacuum mud (sand pump) and gold-cleaning machines.
0 comments:
Post a Comment